Force 10G HL

According to the label, which of the following is a restriction regarding aquatic bodies?

• Do not apply within 25 yards of any lake or river
• Do not apply within 20 yards of any lake, river, or marsh ✓
• Do not apply to any permanent stream or reservoir
• Do not apply if the area is within 50 feet of a commercial fish farm pond

Answer: Do not apply to aquatic bodies (lakes, reservoirs, rivers, permanent streams, marshes, estuaries, natural ponds, or commercial fish farm ponds) within 20 yards

🔗 Source

Which respirator type is required for applicators using Force 10G HL?

• Any N95 mask
• A NIOSH-approved particulate filtering facepiece respirator with R or P filter ✓
• A full-face vapor respirator
• An organic vapor cartridge respirator

Answer: Applicators must wear... a NIOSH-approved particulate filtering facepiece respirator with R or P filter

🔗 Source

What is the minimum distance required between the field edge and a downwind gradient aquatic habitat, unless specific exceptions apply?

• 10 yards
• 20 yards
• 25 feet ✓
• 50 feet

Answer: Maintain a vegetative filter strip of at least 25 feet between the field edge and downwind gradient aquatic habitat, unless specific exceptions apply

🔗 Source

What is the required plant-back restriction for all crops after applying Force 10G HL?

• 24 hours
• 48 hours
• 30 days ✓
• 60 days

Answer: Rotational crop (plant-back) restriction is 30 days for all crops

🔗 Source

In NO-TILL corn acreage that drains to neighboring aquatic sites, what is the required application method?

• Band application
• T-band application
• In-furrow treatment only ✓
• Surface broadcast only

Answer: For NO-TILL corn acreage that drains to adjacent or neighboring aquatic sites, apply as an in-furrow treatment only

🔗 Source

When applying Force 10G HL as a band or T-band treatment, what requirement must be met?

• The product must be applied at least 25 feet from any water source
• The product must be applied only during the vegetative state of the crop
• The product must be incorporated into the top one inch of soil using suitable equipment ✓
• The product must be applied as an in-furrow treatment only

Answer: Do not apply as a band or T-band treatment unless the product can be incorporated into the top one inch of soil using tires, press wheels, closing wheels, chains, or other suitable equipment

🔗 Source

What is the required re-entry interval (REI) for this product?

• 24 hours
• 48 hours ✓
• 12 hours
• 72 hours

Answer: REI: 48 hours

🔗 Source

Which type of gloves are acceptable for use when applying Force 10G HL?

• Any standard cotton or fabric gloves
• Barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, or Viton ≥ 14 mils ✓
• Lightweight latex gloves
• Leather work gloves

Answer: Applicators must wear... chemical-resistant gloves (barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, or Viton ≥ 14 mils)

🔗 Source