Tilt Bravo SE

Which environmental concern is specifically noted regarding the component Chlorothalonil?

• It can cause immediate soil sterilization.
• It can leach into groundwater and contaminate surface water via runoff. ✓
• It increases the rate of evaporation during temperature inversions.
• It reacts with Viton gloves to cause skin irritation.

Answer: The label notes that 'Chlorothalonil can leach into groundwater and contaminate surface water via runoff.'

🔗 Source

When selecting chemical-resistant gloves for handling Tilt Bravo SE, which of the following materials meets the specified requirements?

• Standard latex gloves
• Nitrile rubber ≥ 14 mils ✓
• Cotton fabric gloves
• Any rubber-based glove

Answer: The PPE section specifies chemical resistant gloves such as nitrile rubber ≥ 14 mils, neoprene rubber ≥ 14 mils, polyvinyl chloride (PVC) ≥ 14 mils, Viton® ≥ 14 mils, or butyl rubber.

🔗 Source

If performing an aerial application, what is the minimum buffer distance required from marine/estuarine water bodies unless an untreated buffer is present?

• 25 feet
• 105 feet
• 150 feet ✓
• 200 feet

Answer: The use restrictions state: 'Do not apply within 150 feet for aerial applications... to marine/estuarine water bodies unless an untreated buffer is present.'

🔗 Source

According to the product description, what are the two active ingredients present in Tilt Bravo SE?

• Propiconazole (2.9%) and Chlorothalonil (38.5%) ✓
• Chlorothalonil (38.5%) and Propiconazole (2.9%)
• Propiconazole (2.9%) and Polyvinyl chloride (38.5%)
• Chlorothalonil (38.5%) and Viton (2.9%)

Answer: The label states Tilt Bravo SE is a superemulsion concentrate containing two active ingredients: Propiconazole (2.9%) and Chlorothalonil (38.5%).

🔗 Source

When mixing Tilt Bravo SE, what must the applicator ensure regarding water volume?

• Use the minimum amount of water to save costs.
• Use sufficient water volume for adequate coverage and canopy penetration. ✓
• Use distilled water only to prevent chemical reactions.
• Dilute with 50% alcohol to improve penetration.

Answer: The mixing and dilution notes state: 'use sufficient water volume for adequate coverage and canopy penetration.'

🔗 Source

Under what wind speed condition should an applicator avoid application to prevent drift due to high inversion potential?

• Wind speeds above 15 mph
• Wind speeds between 2 and 5 mph
• Wind speeds above 2 mph
• Wind speeds below 2 mph ✓

Answer: The timing and weather conditions section states: 'Avoid application when wind speeds are below 2 mph due to high inversion potential.'

🔗 Source

What is the mandatory Pre-Harvest Interval (PHI) for crops intended for food, grazing, or animal feed components?

• 12 days
• 25 days
• 105 days ✓
• 150 days

Answer: The label states: 'Do not apply to crops intended for food, grazing, or any component of animal feed within 105 days of application.'

🔗 Source